Due to transit delays on all shipping carriers, we are experiencing shipping delays of up to 10 days

Stennicator Single 1:128 Proportional Pump System | SE20MH81S

Special Price $1,035.62 Regular Price $1,726.03
SKU
410-SE20MH81S
In Stock
The Stennicator is a compact, proportional pump for livestock operations requiring a dosage ratio of 1:28. It functions as a medicator and dispenses iodine, vaccines, acids, chlorine, electrolytes and more.

Stenner-Logo.jpgnew-product.jpg

STENNICATOR PROPORTIONAL PUMP 1:128

The Stennicator is a compact, proportional pump for livestock operations requiring a dosage ratio of 1:28. It functions as
a medicator and dispenses iodine, vaccines, acids, chlorine, electrolytes and more. The pump accepts a signal from a
water meter providing a dry contact at a rate of 1 or 10 ppg or 1 ppl and injects directly into the water line. The
Stennicator also features a signal repeater relay that can repeat the incoming signal to another Stennicator, controller or
other device. When utilizing a house controller, the standby setting stops the pump from injecting but it still sends the
water signal to the controller.

CONVENIENT METER SYSTEM

Save time on installations with the Stennicator
Meter System with the pump and 3/4" or 1"
plastic, dry contact water meter pre-mounted
on a heavy duty panel.
A flow indicator is included to confirm the
solution is pumping and the junction box keeps
the wires neatly contained.

One Stennicator is utilized when the water consumption is less than 3,000
gallons per day at a water flow of 2.7 gallons per minute.
Two Stennicators are utilized to achieve 1:128 dosing for water consumption
for more than 3000 gpd at a water flow up to 5.4 gallons per minute.

The Stennicator System includes the pump and water meter mounted to a heavy duty panel. The dual system includes two Stennicators
and water meter for higher outputs

Features

• On/off switch
• Brushless motor
• Totally enclosed
• 3-point roller design assists in anti-siphon protection
• Pump head requires no valves, allows for easy maintenance
• Self-priming against maximum working pressure foot valve not required
• Pump does not lose prime or vapor lock
• Pumps off-gassing solutions and can run dry
• Output volume is not affected by back pressure
• Easy to change pump tube; lubrication is not required
• All pump accessories included allow a fast and easy installation
• UL & cUL for indoor & outdoor use

Accessory Kit Shipped With Each Pump

3 connecting nuts 1/4"
3 ferrules 1/4"
1 injection check valve 80 psi (5.5 bar)
1 weighted suction line strainer 1/4"
1 20' roll suction/discharge tubing 1/4" white
1 additional pump tube
1 manual

 

econ-tubereplacement.png

 

made-in-usa-logo.jpg

 

Copyright © 2020 StennerPumpParts.com. All rights reserved.