Due to transit delays on all shipping carriers, we are experiencing shipping delays of up to 10 days

Stenner Plastic Water Meter 3/4" | JLP0750

Special Price $274.62 Regular Price $311.98
SKU
410-JLP0750
In Stock
The Stenner Dry Contact Water Meter is a component of the proportional feed system, which delivers repeatable doses regardless of the systems flow rate. The system is used in applications requiring proportional chemical injection.

The proportional feed system, Stenner refers to as the PCM system consists of three components:

  • PCM – pump control module
  • Single head fixed output pump (45 or 85 model)
  • Dry contact water meter
    • Body: Engineered Reinforced Plastic (nylon)
    • Internal: Engineered thermoplastic
    • Magnet: Alnico
  • Accuracy: ± 2% of reading
  • Flow Rate:  0.25 - 22 GPM
  • Maximum operating temperature:  105º F (40º C)
  • Maximum operating pressure:  100 psi (6.9 bar)

The water meter sends a pulse signal to the PCM which activates the pump to deliver the desired dose based on water volume. The PCM turns on the pump for the set duration to inject the solution into the water line.

Selecting The Right Pulse Rate:

  • 1 Pulse/Gallon:  For flow rates of less than 5 GPM
  • 2 Pulse/Gallon:  For flow rates of higher than 5 GPM

Specifications:

  • Material
    • Body: Engineered Reinforced Plastic (nylon)
    • Internal: Engineered thermoplastic
    • Magnet: Alnico
  • Accuracy: ± 2% of reading
  • Maximum operating temperature:  105º F (40º C)
  • Maximum current:  20mA
  • Maximum voltage:  24 Vdc or Vac
  • Sensor:  Reed switch
  • Cable length:  5 ft (1.5m) standard
  • Stenner part#:  JLP0750
  • Dimensions:
    • A =   7.5" (19.1 cm)
    • B =   11.5" (29.2 cm)
    • C =   1"
    • D =   0.75"
Copyright © 2020 StennerPumpParts.com. All rights reserved.