Stenner Eco Brass Water Meter 2" | MNLRS20
The Eco Brass meter is certified with the Water Quality Association under NSF/ANSI 372 (low lead). It does not require power and utilizes a reed switch that provides a pulsing dry contact signal
This product has been discontinued by the manufacturer
The Eco Brass meter is certified with the Water Quality Association under NSF/ANSI 372 (low lead). It doesn’t require power and utilizes a reed switch that provides a pulsing dry contact signal.
Speccifications
- Accuracy ± 1.5%
- Flow Rate: 1.98 - 132 GPM
- Maximum Operating Temperature 122°F (50°C)
- Maximum Operating Pressure 150 psi (10.3 bar)
- Maximum Current 20mA
- Maximum Voltage 24VDC or VAC
- Sensor Reed Switch
- Cable Length 6 ft (2 m) standard
The water meter sends a pulse signal to the PCM which activates the pump to deliver the desired dose based on water volume. The PCM turns on the pump for the set duration to inject the solution into the water line.
Selecting The Right Pulse Rate:
- 1 Pulse/Gallon: For flow rates of less than 5 GPM
- 2 Pulse/Gallon: For flow rates of higher than 5 GPM
- 4 Pulse/Gallon.